Daho Threading Splicing Needle

Daho Threading Splicing Needles are hollow inside, except for the point, so monofilament or fluorocarbon line can be inserted into the needle. Then, the needle with the internal mono/fluorocarbon line, is inserted, or threaded, into the hollow center section of the spectra braid. The needle, and attached mono/fluorocarbon line, is typically inserted inside of the spectra from 3 to 5 feet to provide the best strength of the join. Because of the slick surface of the mono/fluorocarbon line, the end point of the spectra must be finished to secure it to the mono/fluorocarbon line. This finishing is usually done by gluing, serving, crimping, or some combination of these attachments, to the spectra line end. This ensures the join will not slip before the compression pressure occurs in the braid of the hollow spectra line to hold the joined lines together.

Remember that the ID sizes of a threading needles can vary up to 0.002″ due to the tube manufacturing process. It is recommended that you select a needle that is at least 0.002″ larger than your line for ease of use. It can also be difficult to fit an exact size of line into a needle.

Sold per each

An image showing the detail of both ends of one DaHo Threading Splicing Needle is provided.